The best paver joint mixture that adds strength, prevents weeds and eliminates insects - all at a cost much lower than typical joint sand!

Product Details

• DirtGlueDry™ by Global Environmental Solutions, LLC (GES)  powdered polymer is a powerful, high-tech polymer specifically engineered to be mixed with sand to eliminate washouts and erosion between pavers, bricks, patio blocks, and flagstones in walkways, driveways, patios, etc. The added strength helps keep the pavers in place and helps prevent weeds and all types of vegetation from growing in the joints and eliminate insects such as ants. Easy to use and built to last.
• DirtGlueDry™ is applied by mixing the dry product into dry sand which is then spread onto the application and swept into the joints. Once washed in with water it dries to form a firm, stable, flexible joint that resists erosion. Product mixes very easily with sand or stone dust. Once mixed with the sand, the sand is easily spread over the area and swept into the joints and then wetted.
• Benefits include the ability to wash the patio down with high pressure without washing out the infill material.
• You can use a leaf blower to clean the patio (or treated area) of leaves, pine needles, etc. without blowing away the infill material.
• Uses include:
• Patios
• Driveways
• Walkways
• Spray on applications include:
• erosion control
• stockpile sealing
  
• embankment stabilization
  
• to eliminate TSS in stormwater run-off dust

• A non-hazardous product, DirtGlueDry™  polymer contains no harmful chemicals, will not adversely affect people, animals or aquatic life. It is a latex acrylic emulsion that  is water soluble.  Acrylics while non-toxic are a petroleum derived product with a high embedded energy cost.
• DirtGlueDry™  has been certified for use by:
• California Water Quality Control Board
• New York Department of Environmental Conservation 

Comes in  containers: 1 pound,  1 pail(28 lbs), 55 gallon drums.  Please contact us for delivery quote on the  drum and tote.    Must stored above 32 Degrees Fahrenheit.

Adjustable application rate (nominal 3.5% by weight of infill material)

3.5 lbs/cu ft

3.5000 lbs/cu ft

123.6015 lb/m3

Apply DirtGlueDry™ Powdered Polymer at a rate of 2% (by weight) with PolyCure ½% (by weight) or 2 ½% (by weight) when not using PolyCure.

DirtGlueDry™ - Keep containers sealed when not in use.