Foundation Dampproofing and Wall Waterproofing

The Foundation Protection System that Keeps Basements Dry

Protecting your foundations from water and moisture is critical. DELTA®-MS is a dimpled membrane that uses our exclusive Air-gap Technology to ensure your basements stay dry and last longer. 

Long-lasting Moisture Protection, Long-lasting Satisfaction

The vacuum-formed dimpled pattern creates an air gap between the membrane and the foundation, allowing water to drain. By keeping water away from the foundation wall, DELTA®-MS is able to keep basements permanently dry and protected. Unlike sprays, which crack when concrete walls crack, it bridges cracks so no water intrusions can occur. This dampproofing helps ensure more comfortable and healthier living spaces for your homeowners; better efficiency and durability for your buildings; and fewer warranty claims and call-backs for you.

The Most Durable Dimpled Membrane on the Market 

Made from 60% recycled and 40% virgin materials, the co-extrusion process and offset dimples of DELTA®-MS create higher compressive strength and impact resistance, ensuring its performance and protection last longer, especially when compared to other membranes typically made from 100% recycled materials and sprays.

Faster Installation, Better Protection

Unlike sprays, DELTA®-MS doesn’t require specialized safety equipment and you don’t have to wait around for the concrete to cure or the fumes to dissipate so installation can be faster, easier, and more cost effective. The extensive DELTA® Academy Certified-Installer Program helps ensure materials are properly applied, allowing you to provide an industry-leading warranty. 

 ■ Produced in our ISO 9001 registered manufacturing plant.

■ Approved under International Building Code and International Building Code and International Residential Code (ICC ESR-2932)

https://www.dorken.com/en/our-products/products/residential/delta-ms.php

DELTA® products support sustainable and energy-efficient building practices, including efforts toward achieving LEED® certification (LEED® for New Construction & Major Renovations, LEED® for Core and Shell, LEED® for Existing Buildings and LEED®
or Homes)

 Click link below for  Product Declaration in Approvals section

https://www.dorken.com/en/our-products/products/residential/delta-ms.php

Delta MS 9'10"- Product #22600114

Click on link below for Technical Data Sheet:

https://www.dorken.com/en/our-products/products/residential/delta-ms.php

Product name
DELTA®-MS

Color
chocolate brown

Material
Recycled high-density polyethylene, encapsulated between two layers of special virgin HDPE

Dimple height
5/16" (8 mm)
ASTM D6364-06
Compressive strength
approx.5,200 psf
(250 kN/m²)
ASTM D6364-06
Flow rate / unit width @ hydr. grad. 1; 100 kPa
10.6 gal/min/ft
(132 l/min/m)
ASTM D4716-08
Flow rate / unit width @ hydr. grad. 0.1; 100 kPa
3 gal/min/ft
(37.5 l/min/m)
ASTM D4716-08
Air-gap volume between dimples
approx. 0.13 gal/ft²
(5.3 l/m²)
ASTM D4716-08
Water penetration resistance
> 120 psi (815 kPa)
Watertight
AATCC 127-1995
Water vapor trans- mission
< 22 ng/(Pa s m²)
ASTM E96,
Meth. A
Vapor
permeance
< 0.3 perms
[grains/h/ft²/in Hg]
ASTM E96,
Meth. A
Temperature range
-22°F to +176°F
(-30°Cto +80°C)
ASTM D5261-92
Chemical
properties
Excellent chemical resistance, resistant to root penetration,
rot-proof

Toxicity
non-toxic, non-polluting

Roll length
65’ 7” (20 m)

Roll width / weight
3’ 6” (1.07 m) 28 lbs (12.7 kg)
5’ (1.52 m) 41 lbs (18.6 kg)
6’ (1.83 m) 47 lbs (21.3 kg)
6’ 7” (2.00 m) 51 lbs (23.1 kg)
7’ (2.13 m) 55 lbs (24.9 kg)
8’ (2.45 m) 63 lbs (28.6 kg)
9’ 10” (3.00 m) 77 lbs (34.9 kg)

Service life expectancy
> 25 years (at pH between 4 and 9, and temperature below 77°F / 25°C). Do not expose to UV light for more than 30 days.